Horns, Turn Signal Assembly & Dash

A lot of information for building the car isn't exactly given in the build manual. Sometimes we spend hours just trying to find a wiring diagram or how to make something work on the forums..

Tonight I installed the horns and grounded them, though we still need to figure out which wires are needed for the power through the stock harness.
Then we put the turn signal assembly together. This piece (which is not from FFR) was extremely well designed for the car and looks great. Now the stalk will self cancel like any normal car. We still do need to run the wires for it though.

Then we cut more holes in the under dash panel for the heater and some wiring.

Next we glued the upholstery to the dash.

Then cut all the holes for the gauges, switches, key and lights.