Air Intake, New Radiator Hose, Power Steering Resevoir, Exhaust, Wiring, Misc..

Today I started by trimming the excess plastic from the MAF before the filter. Then I mounted the filter..



And the silicone hoses we ordered to the intake to complete the assembly.



We filled most of the radiator fluid last week and I noticed it had been dripping. The problem was one of the hoses cut cut somehow. I removed it and replaced it with a new one.



Scott Attached the wiring to the firewall.



And hooked up the Mach 1 wiring harness to its connectors on the interior side.



He also connected all the fuse panel wiring and misc wiring in the front. Now he just needs to mount it. Other than the lights, pretty much all the wiring has been hooked up, so the car is 99% wired.



I put our new power steering resevoir as well.



And they hooked up the cats and side pipes. We're just testing they'll mount properly, we still need to send the side pipes out to get chromed.


The car is very close to being started. It has all the fluids now (aside from what will be topped up after its ran for a little while) and the important wiring is connected. Hopefully the next post will be about the car running!